When out on a road or camping adventure in your pop up camper, the last things you want to experience are cold nights and days. Lucky enough, there are a wide range of pop up camper furnaces available in the market that you can get your camping trailer fitted with if it is not already equipped with one. However, choosing the ideal furnace for your camper may sometimes prove to be a daunting task. Here are the various available options of Pop Up Camper Furnaces in the market as well as some important factors to consider when choosing a good one.
Furnace Types According To Heat Circulation Method
Depending on how the heat is circulated by your heating system through various parts of your camper trailer or RV, there are two main options to consider. These include direct discharge furnaces and ducted furnaces.
Direct Discharge Furnaces:
In the direct discharge systems, the heat originates from the faceplates, which can often be seen inside of the trailer. Since no ducting is required, these units are quite easy to install, compact, and lightweight. They are quite effective, especially for heating smaller campers.
In the ducted furnaces, the heat originates from a heating source and then gets circulated to various parts of your recreation vehicle through a system of vents or ducts. These systems allow more heat dispersion and a more balanced heat distribution. However, they can be a bit more involving to install, primarily due to the ducting and venting system.
Camper Trailer Furnace Types By Operation
Before buying a furnace for your pop up camper or RV trailer, it is important to understand the various available options or types. There are basically for common options in terms of performance mechanism and operation as listed below.
• Heat Strip Heater Systems: Produce minimal heat through the camper rooftop Ac system
• Heat Pump/Exchanger Systems: Versions with a heat pump or heat exchanger included in the rooftop AC system.
• Propane Gas Furnaces or Forced Air Heaters
• Aqua-Hot Boilers: provide moist hot air
Heat Strip Heaters:
In this system, there is an AC system on the rooftop, with small electric coils positioned in front of the unit’s fan blower. Once the coils heat up, hot air is blown by the fan through the ducts or direct vents connecting to the rooftop AC system. Considering the principle that hot air rises, whereas in this case, the heat originates from the roof downwards, only a minimal amount of heating will occur near the floor level.
Heat Pump/Exchanger Systems:
This is similar to the versions utilized in home heating. Instead of heat coming from the camper ceiling downwards, the heat pump or exchanger systems operate in a reverse manner, from down upwards. These are also electric powered and utilize the camper van’s electrical systems.
Propane Gas/Hot Forced Air Furnaces
Propane gas furnaces are the most commonly preferred systems by most RV owners. As a matter of fact, most pop-up campers come equipped with this type of furnace. Just like the name suggests, these make use of propane for power/fuel source. They are quite economical, easy to install, and effective but in most cases require more maintenance efforts as compared to other options in terms of cleaning the air inlets. They are also ideal for floor heating and are quite impressive for their compact design. Most of the propane gas furnaces are vented and installed beneath the RV or camper trailer refrigerator.
Hot Water Furnaces
Also known as Aqua-Hot Furnaces Hot Water Furnaces are the other type of furnaces commonly used for RV heating systems. Just like the name suggests, they warm up your popup up camper using heated water that circulates from the boilers through the RV duct systems to warm up the components. Some are diesel powered, whereas others are propane powered. However, this system is considered more involving and time-consuming in terms of installation and the fact that a continuous supply of water is required to keep the camper warm for consistent heating.
Other Factors to Consider When Choosing a Pop up Camper Furnaces
In addition to considering the type by performance and deciding on whether to choose a ducted or ductless furnace system, there are other important factors to consider. Of course, you will want a system that comes at a fair price, is reliable and gives you the best value for your money. Here are some additional features to consider:
• Electric vs. Gas Powered
• Size Vs Your RV Space
• Heating Requirements
• BTU Rating (Performance): When choosing an ideal furnace system for your RV, the BTU rating is one of the most important factors to consider. BTU is short for British Thermal Units, which is a standard unit used to describe the amount of heat energy produced or consumed. A higher BTU rating represents a higher heating capacity. it is always important to determine which furnace is best for your camper by BTU capacity depending on factors such as the size, climate, and heating requirements.
Once you’ve assessed these considerations, here are some product examples you can start by reviewing.
Pop Up Camper Furnaces – Recommendations
1: Atwood RV Medium Furnace, 30,000 BTU 12Volts DC
• Buy From: campingworld.com
• Price: $783.73
• Link: https://is.gd/L7nbm9
2: Suburban Nt-20sq 2450a 12 V RV Camper Motor home Gas Furnace Ducted, 19000btu
• Buy From: Amazon
• Price: $339.99
• Link: https://is.gd/LQzFv6
3: Suburban RV Gas Furnace SF-30FQ, 30,000 BTU
• Buy From: rvpartsnation.com
• Price: $559.95
• Link: https://is.gd/sU5VPS